The topper is the last thing you put on the tree and the first thing people notice. A store-bought star does the job, but a handmade one fits your tree in a way nothing from a box can. It matches your colours, suits the size of your tree, and costs next to nothing when you make it from what you already have.
These 18 DIY Christmas tree toppers cover the whole range. There are wooden stars, paper stars, two angels, three bows, and a few ideas that fit no category at all. Every one links to the creator who first shared it, so you can follow the full steps.
1. Pallet wood star
This one costs nothing if you have an old pallet lying around. Stacy Ling’s husband cut their star from pallet boards left over from other projects, joined the pieces on the back with small metal plates and screws, and left the wood natural. It measures about 9 inches square, so it suits a full-size tree without looking lost. A length of picture wire on the back slides over the top branch and holds it in place. Use pallets stamped HT for heat treated, never MB, which means chemical treatment. Tutorial: Stacy Ling.

2. Foraged twig star
Six straight twigs and some twine are all this one needs. Srija Burman of Hearth Junction gathers larch branches about 10 to 14 inches long, trims them to matching lengths, and lays them out as two overlapping triangles to form a six-pointed star. Each crossing gets wrapped with jute string and knotted tight. Willow, birch, or dogwood work just as well if larch does not grow near you. A light mist of gold or silver spray paint is optional, and the finished star is light enough to nestle into the top branches. Tutorial: Hearth Junction.

3. Bottle brush star
White bottle brush trees give this topper a vintage feel that suits a retro tree. The maker at White and Wood Grain bends five tall bottle brush trees at their wood bases, hot glues the bases together into a star shape, and fixes a ball ornament in the centre. The whole thing takes about 20 minutes. A loop of floral wire on the back twists around the top branch to hold it steady. Tutorial: White and Wood Grain.

4. Pinecone star
Five large pinecones, one on each point of a wire star, make a topper that looks straight out of the woods. Flying Flowers glitters the edges of the pinecones first and leaves them to dry, then bends three lengths of craft wire into a five-pointed star frame. A hole drilled through each pinecone lets it slide onto a wire point, and one longer wire end is bent into a hook for hanging. Tutorial: Flying Flowers.

5. Beaded wooden star
Wooden beads on wire make a star that works on a rustic tree, a Scandi tree, or a tree with hardly any colour at all. Making Lemonade threads wooden beads onto aluminium wire, bends the wire into a five-pointed star with even sides, and twists the ends together. A small wire loop on the top point wraps around the highest branch. The project takes about half an hour, and you can paint or stain the beads to match your ornaments. Tutorial: Making Lemonade.

6. Twine-wrapped wire star with bells
Camila Rojas of The Crafting Nook bends wire into a star frame, wraps it all over with jute twine, then adds a second layer of white yarn for contrast. Small silver and gold bells hang from twine strips at the bottom, with a little bow on top. She makes hers as an ornament, so for a full-size tree, bend a bigger wire frame and use a thicker wire that holds its shape. Tutorial: The Crafting Nook.

7. Gold bamboo skewer starburst
Eryn Whalen wanted a star big enough for a ten-foot tree, and bamboo skewers turned out to be the answer. She pushes the skewers into a foam floral ball, fanning them out in all directions, then spray paints the whole thing gold and adds a heavy coat of large glitter, sealing each section with clear spray as she goes. The metal paint bounces the tree lights back even though the star itself has no lights. Tutorial: Eryn Whalen.

8. Layered card star
Two sheets of firm card are enough for this one, and it weighs almost nothing. Christine Britton cuts a large star from one sheet and a smaller star from the other, glues the small star on top with the points lined up, and traps two pipe cleaners behind a card circle glued to the back. The finished star is about 19 cm tall. Twist the pipe cleaners around the central stem of the tree and tuck the ends in. Tutorial: Christine Britton.

9. 3D paper star with a free template
If folding from scratch feels fiddly, start with a template. Craving Some Creativity offers free printable 3D star templates in a few sizes, and the writer made her own tree topper with the larger single-arm version after hunting for the right one in stores. You cut five arms, fold the tabs, and glue them into a sculptural star. To hang it as a topper, punch two holes in the back, thread stiff ribbon through, and tie it to the top of the tree. Tutorial: Craving Some Creativity.

10. 3D origami star
One square of paper, a few folds, and some glue are all it takes. Housewife Eclectic starts with a 12-inch square so the finished star comes out close to the right size for the top of a tree, then folds each of the four diamonds into a point and glues one side under the other to puff it up. A pencil pushed down each point helps it stand proud. Tutorial: Housewife Eclectic.

11. Toilet paper roll quilled star
This is the one to make on December 23rd when you realise the tree still needs a topper. Ann Martin of All Things Paper flattens four toilet paper rolls, cuts them into half-inch segments, and glues the loops into a layered snowflake star shape, then paints it gold. You need about 30 segments, plus a few cut smaller for the inner petals. Straight pins hold the loops while the glue dries, which matters if you want the points to stay even. Tutorial: All Things Paper.

12. Golden felt star
A big felt star, some copper paint, and glitter paint turn into a topper with a warm metallic glow. The Artistic Farmer paints both sides of the felt star with copper metallic acrylic, then adds two kinds of glitter paint, one chunky and one fine, letting each coat dry fully in between. A length of strong copper wire is bent into a stand and hot glued to the back, with a wire heart shape for decoration on each side. Tutorial: The Artistic Farmer.

13. Little felt angel
This is the topper to make with a child. Activity Village rolls a semicircle of felt or card into a cone for the body, adds a craft foam face with googly eyes, and cuts yellow felt hair for the front and back. The wings are a figure-of-eight shape cut from white craft foam, and the halo is craft wire dipped in glue and then in silver or gold glitter. Ask your child to sign and date the inside of the cone. Tutorial: Activity Village.

14. Paper angel for a cutting machine
If you own a Cricut, this angel is worth the effort. Sarah of Craft with Sarah cuts hers from thick glitter and pearlescent card, about 300gsm, and folds the layered skirt into a cone so the angel sits neatly on top of the tree. You can scale it up or down for different trees. One honest note: the cut file comes as part of her Instant Access Bundle rather than as a free download, so check that before you start. The written steps and video walk through the assembly either way. Tutorial: Craft with Sarah.

15. Velvet ribbon bow
A big velvet bow suits a tree that already has plenty of ornaments and needs something soft at the top. Courtenay Hartford of The Creek Line House uses nearly a whole 25-foot roll of 4-inch wired velvet ribbon for one bow. She makes loops in a figure-eight shape, pinching each pair together at the base, until she has about twelve loops, then binds them tight with pipe cleaners. Streamers cut about two feet long hang down the front of the tree. Tutorial: The Creek Line House.

16. Burlap bow
Shanty 2 Chic’s burlap bow is the farmhouse answer to the velvet one, and it only needs scissors and a hot glue gun. Cut a three-foot strand of burlap garland, fold the ends over to make two loops, and glue them in place. A skinny strip wrapped around the pinched middle finishes the bow, and a second three-foot strand folded at the centre makes the tails. A piece of twine run behind the middle ties the whole thing to the top of the tree. Tutorial: Shanty 2 Chic.

17. Deco mesh bow
Leslie Lambert of Lamberts Lately builds her topper on a plastic cup, which sounds odd until you see how full it turns out. She makes six X-shaped bows from two colours of deco mesh ribbon, hot glues them around an upside-down cup, then fills the gaps with ornaments and floral picks. The whole project takes about 30 minutes and stays light enough for the top branch. Tutorial: Lamberts Lately.

18. Ribbon pom-pom
HGTV’s ribbon pom-pom is the simplest topper in this list, and it looks great on a tree with a playful theme. Wrap four ribbons around a piece of cardboard ten times, tie the loops tight at the centre with a one-foot length of ribbon, then cut both folded ends and fluff the pieces out into a ball. A scrap of ribbon or a twist of green craft wire attaches it to the top of the tree. Tutorial: HGTV.

Picking a topper that stays put
Size matters more than style. For a six or seven-foot tree, a topper around 8 to 12 inches tall looks right. Anything much bigger tips forward, and anything much smaller disappears into the branches. Hold your finished topper up against the tree before you decorate the top branches, so you can see the scale while you can still reach it.
Weight is the second thing to check. Paper, twine, and ribbon toppers sit happily on almost any tree. A pallet wood star or a glitter-heavy skewer starburst needs a strong central stem, so bend the top few inches of the trunk upright and wire the topper to that stem, not to a single branch.
Put the topper on before the top ornaments go up. That way you can step back, check it from the doorway, and straighten it without knocking baubles off. If your topper sits near lights, use LED fairy lights only, and keep bulbs and wiring clear of paper and fabric. The same goes for the DIY Christmas garlands on your tree: keep paper garlands away from hot bulbs too.
Frequently asked questions
What size should a DIY tree topper be?
For a six or seven-foot tree, aim for a topper around 8 to 12 inches tall. Scale down for a tabletop tree and up for a nine-foot tree. A good check is that the topper should be easy to spot from across the room without towering over the tree.
How do I keep a heavy topper from tipping the tree?
Bend the top branch or trunk upright so it points straight up, then wire the topper to that central stem with floral wire or pipe cleaners. A cone or dowel base glued to the back of the topper helps it grip. Test it before you hang the top ornaments, and re-check it after a day, since branches settle under weight.
What is the easiest DIY tree topper for a beginner?
A ribbon bow or a paper star. The velvet bow in this list needs only ribbon and pipe cleaners, and the layered card star needs two sheets of card and some glue. Both take under an hour and need no special tools beyond scissors.
Can I make a tree topper with kids?
Yes. The little felt angel and the paper stars are good family projects. Let kids cut, glue, and decorate, and let an adult handle the hot glue gun, craft knife, and any wire cutting. The felt angel is small enough for a tabletop tree, which is a good first tree for a child to decorate alone.
How do I attach a star topper to an artificial tree?
Most artificial trees have a central pole that pokes out at the top. Slide a cardboard cone, a short tube, or a wire loop over that pole, then wire it in place. Pipe cleaners work well here because you can twist them tight and tuck the ends out of sight.
Will a paper topper last more than one Christmas?
Yes, if you store it flat. Wrap it in tissue paper, lay it in a box where nothing heavy sits on top, and keep it somewhere dry. Card stars hold up for years this way. Keep paper and fabric toppers away from damp storage, and away from hot bulbs on the tree.
A finished tree starts at the top
Any of these 18 toppers will finish a tree, but the best one is the one you actually enjoy making. Start with the materials you have and give yourself an evening to make it properly. If you want more handmade touches to go with it, our handmade Christmas ornaments pair well with a homemade topper, and a DIY Christmas wreath on the door pulls the whole look together. And if you are wrapping gifts to go under that tree, our DIY Christmas gift wrap ideas use the same kind of simple supplies.
Leave a Comment